The Accent Color partially covers the top, bottom, arms and 3 batteries of your DJI Air 3S.
In addition to simply dressing up your drone, the use of an Accent Color is expected to make it easier to see your drone's direction compared to a drone in the original grey color.
The Wrapgrade's quality remains the same even if it is only partially applied. Recommended as an introduction to drone wrapping for those who do not have the confidence to do a full wrap yet.
Important
It has been confirmed that some lots have been coated with an antifouling coating. In addition, there may be residues of stripping agents from plastic casting. These will significantly reduce the adhesive strength of our wrap film. Please be sure to degrease and clean the product thoroughly before starting the application process.
For the EU regulations
Comply with the European Class Identification Label.
In the EU, the EASA Class Identification Label (CIL) is mandatory and should not be covered with a skin sticker. The CIL on the Air3S is located on the front underside and has been cut out. For non-EU countries, or if you prefer, the area can be covered.
Spec
An instruction manual is attached (English, German, French, Simplified Chinese, Japanese)
1 set contains accent wraps for Air 3S’s body + 3 batteries. *RC wrap is sold separately.
Size: 21 cm × 15 cm × 2
Weight: Wraps=6g, Package=50g
Material: Polyvinyl chloride
Thickness: 0.12 mm to 0.17 mm (differs by surface finish including adhesive)
Adhesive: Acrylic
Corresponding ambient temperature: -30 to 107 °C, Continuous 70 °C
Weather resistance: About three years (by the application methods and use environment, this time may become shorter)
How to apply video
[IMPORTANT NOTICE] The colors in the pictures and videos may differ from actual colors. To avoid misselection, we recommend ordering our free color sample first. If you do not get a sample in advance, we do not accept return or color exchange.
This product is made for a drone. Please do not use it for any other purpose. Misuse may cause unexpected accidents.
Keep out of reach of children. There is a risk of suffocation if accidentally swallowed.
If you feel it has negative effects on the performance after applying the sticker to the drone, please stop using and remove the sticker immediately.
This product is our original and not a licensed product. Applying the sticker to a drone is the responsibility of the purchaser. We have confirmed that there was no problem in general use. Please note that we are not responsible for any trouble that may occur.
The color of This product might change with use, it may fade. Discoloration, part peeling is not our responsibility.
The drone's body in the product photos, background decorations are not included in the product. We might change the design or layout without notice.
Company name and product name on this site are trademarks or registered trademarks of each company.
DJI Air 3
Image movie
Combine with other wraps
It is designed based on the poly concept, the top, bottom, arms and battery parts can be replaced with the Accent color set.
Accent colors can be used to improve the visibility of the dark-colored main unit, or color-coordinated to match team colors or your favorite theme.
we use 3M automotive-grade wrap films. The 3M high-quality films are made for outdoor use. The thin and strong material withstands the harsh environment during use, and it does not affect the performance. We have confirmed that it does not affect the radio waves either.
Had one for my Mavic Mini and when we upgraded to the Air 3S, we wanted the same quality and high visibility color (Orange) and ordered the same color for the Air 3S.
All the cuts were precise and fit perfectly, as long as you don’t rush your work. The decals allow to be pulled off and repositioned if need be. Overall good quality and best bang for the buck!
匿
匿名
張り易い
番号がつけてあり張り易いです。
G
G.B.
By far the BEST product
By far the BEST product !!!
M
M.
I liked it in orange
The orange color are awesome and bright enough during daylight flight...
If you’re looking to customize your DJI NEO with a high-quality, perfectly fitting, and easy-to-apply skin, WRAPGRADE is by far the best in its class. The precision of the cut, the durability of the material, and the flawless finish make it stand out from anything else on the market.
It’s incredibly easy to apply—even on the curved surfaces of the NEO—and the accent colors look fantastic both in the air and on the ground. The pricing is more than fair for the premium quality you get.
I’ve used WRAPGRADE products on our entire fleet of aircraft at Palisades Aerial Media, and they’ve consistently delivered outstanding results every single time. Highly recommended for anyone who wants to protect and personalize their drone with confidence.
