The Accent Color partially covers the top, bottom, arms and 3 batteries of your DJI Air 3S.
In addition to simply dressing up your drone, the use of an Accent Color is expected to make it easier to see your drone's direction compared to a drone in the original grey color.
The Wrapgrade's quality remains the same even if it is only partially applied. Recommended as an introduction to drone wrapping for those who do not have the confidence to do a full wrap yet.
Important
It has been confirmed that some lots have been coated with an antifouling coating. In addition, there may be residues of stripping agents from plastic casting. These will significantly reduce the adhesive strength of our wrap film. Please be sure to degrease and clean the product thoroughly before starting the application process.
For the EU regulations
Comply with the European Class Identification Label.
In the EU, the EASA Class Identification Label (CIL) is mandatory and should not be covered with a skin sticker. The CIL on the Air3S is located on the front underside and has been cut out. For non-EU countries, or if you prefer, the area can be covered.
Spec
An instruction manual is attached (English, German, French, Simplified Chinese, Japanese)
1 set contains accent wraps for Air 3S’s body + 3 batteries. *RC wrap is sold separately.
Size: 21 cm × 15 cm × 2
Weight: Wraps=6g, Package=50g
Material: Polyvinyl chloride
Thickness: 0.12 mm to 0.17 mm (differs by surface finish including adhesive)
Adhesive: Acrylic
Corresponding ambient temperature: -30 to 107 °C, Continuous 70 °C
Weather resistance: About three years (by the application methods and use environment, this time may become shorter)
How to apply video
[IMPORTANT NOTICE] The colors in the pictures and videos may differ from actual colors. To avoid misselection, we recommend ordering our free color sample first. If you do not get a sample in advance, we do not accept return or color exchange.
This product is made for a drone. Please do not use it for any other purpose. Misuse may cause unexpected accidents.
Keep out of reach of children. There is a risk of suffocation if accidentally swallowed.
If you feel it has negative effects on the performance after applying the sticker to the drone, please stop using and remove the sticker immediately.
This product is our original and not a licensed product. Applying the sticker to a drone is the responsibility of the purchaser. We have confirmed that there was no problem in general use. Please note that we are not responsible for any trouble that may occur.
The color of This product might change with use, it may fade. Discoloration, part peeling is not our responsibility.
The drone's body in the product photos, background decorations are not included in the product. We might change the design or layout without notice.
Company name and product name on this site are trademarks or registered trademarks of each company.
DJI Air 3
Image movie
Combine with other wraps
It is designed based on the poly concept, the top, bottom, arms and battery parts can be replaced with the Accent color set.
Accent colors can be used to improve the visibility of the dark-colored main unit, or color-coordinated to match team colors or your favorite theme.
we use 3M automotive-grade wrap films. The 3M high-quality films are made for outdoor use. The thin and strong material withstands the harsh environment during use, and it does not affect the performance. We have confirmed that it does not affect the radio waves either.
My AIR2S has Wrapgrade, so of course AIR3S should too ;-)
Even though mail from Japan to Denmark takes a while, it was worth the wait.
Thank you very much ;-)
j
j.E.
Loving my Wrapgrade!
What a great company! I bought Wrapgrade for my Air3s and M5P. Hoping they come out with Wraps for the NEO2.
P
P.C.
Best wrap as always!
Had one for my Mavic Mini and when we upgraded to the Air 3S, we wanted the same quality and high visibility color (Orange) and ordered the same color for the Air 3S.
All the cuts were precise and fit perfectly, as long as you don’t rush your work. The decals allow to be pulled off and repositioned if need be. Overall good quality and best bang for the buck!
I ordered the wrap for the 40v battery and a personalized sticker, i also ordered a wrap for the dustblower, what i did not realise it was the 18v version. So the staff sendt me a mail do check if i may have made a mistake wich ive had.
I got to change the order before they shipped it so i got a wrap for the olfa knife insted.
They were incredibly helpfull and easy to work with and i higly recommend Wrapgrade to anyone who wish to spice up their tools.
All in all exceptional customer service and a awesome product, i will defintly buy more!
