Drone Registration Number Stickers *Large

▲Drone registration number sticker - Small

▼Drone registration number sticker - Large

• Sheet size: approx. 9 cm x 7 cm 
• Weight: Weight of the sticker: approx. 0.2 g or less, package weight 20 g or less.
  
• Material: Polyvinyl chloride
• Thickness: 0.12 mm - 0.17 mm (depending on surface finish). Including adhesive)
• Adhesive: Acrylic (special adhesive that is re-peelable and does not leave adhesive residue).
• Ambient temperature: -30 to 107°C (-30 to 107°F) instantaneously, 70°C (70°F) continuously.
• Approximate weather resistance: approx. 3 years (may be shorter depending on installation method and environment of use).
  
  To ensure the adhesive strength of the sticker
  Before applying the sticker, degrease the surface to be covered.
  After positioning, press down hard and straight from above to incorporate the microbeads on the surface of the adhesive material into the adhesive and to achieve the original adhesive strength. Be sure to crimp the adhesive. Lateral rubbing may damage the wrap and printing.
  
  Although we do our best to make the colors in the product photos as close as possible to how they actually look, some products have very strong colors and the way they look changes depending on the surrounding light, making it very difficult or impossible to reproduce them on a monitor screen or other display device. For this reason, we have prepared free colour samples.
  The colour samples include all the colours of the WRAPGRADE series, as well as limited-time-only colours, and are made of the same material as the product to be delivered.
  
  If you cannot decide which color is best for you, or if you are unsure about the color, please ask for a color sample postcard in advance.
  We do not accept requests for returns or exchanges of colors from customers who have not ordered a color sample.

▲Important notes before pasting
It has been found that some batches of new subject products have been coated with an anti-fouling coating.
There may also be residues of stripping agents in plastic casting.

These can significantly reduce the adhesive strength of the wrap. Be sure to degrease and clean the product thoroughly before starting the application process.

⚠️

WARNING and SAFETY INFORMATION

• AGE RESTRICTION: Recommended for ages 15 and over. Keep out of reach of infants and young children.
• CHOKING HAZARD: Small parts. Risk of suffocation if swallowed.
• USAGE & SAFETY: This product is a decorative skin sticker set specifically designed for drones. Do not use for any other purpose.
• FLIGHT SAFETY: After applying the stickers, check the performance and movement of the drones. If you notice any negative impact on flight performance or stability, stop using the product immediately.
• APPLICATION & REMOVAL: Ensure the surface is clean and degreased before application. Remove the stickers slowly to prevent adhesive residue.

General Information

• This product is our original and not a licensed product. Applying the sticker to a drones is the responsibility of the purchaser. We have confirmed that there was no problem in general use. Please note that we are not responsible for any trouble that may occur.
• The color of This product might change with use, it may fade. Discoloration, part peeling is not our responsibility.
  
• The drones in the product photos, background decorations are not included in the product. We might change the design or layout without notice.
  Company name and product name on this site are trademarks or registered trademarks of each company.