Drone Registration Number Stickers

$5.00
Shipping calculated at checkout.
SKU: DWRS-GL002

Wrapgrade helps you to

・Protect your drone from scratches
・Make your drone stand out in the sky
・Personalize just by wrapping

Accurate designed & cut wraps. No need to use special tools like hair dryers. It is easy to apply & remove. No sticky residue!

Drone registration sticker set *regular* size

Set of 6 drone registration number stickers: 2 large, 2 midium, 2 small stickers

<Large x2>

Height: 10 mm / Width: 50 mm

Letter height: 6.2 mm

<Midium x2>

Height: 6.5 mm / Width: 35 mm

Letter height: 4.3 mm

<Small x2>

Height: 5.5 mm / Width: 28 mm

Letter height: 3.5 mm

The large size set is available here.

The 2-line sticker set is available here.

▲Drone registration number sticker - Small

▼Drone registration number sticker - Large

▼2-line drone registration sticker

  • Sheet size: approx. 9 cm x 7 cm 
  • Weight: Weight of the sticker: approx. 0.2 g or less, package weight 20 g or less.
  • Material: Polyvinyl chloride
  • Thickness: 0.12 mm - 0.17 mm (depending on surface finish). Including adhesive)
  • Adhesive: Acrylic (special adhesive that is re-peelable and does not leave adhesive residue).
  • Ambient temperature: -30 to 107°C (-30 to 107°F) instantaneously, 70°C (70°F) continuously.
  • Approximate weather resistance: approx. 3 years (may be shorter depending on installation method and environment of use).

    To ensure the adhesive strength of the sticker
    Before applying the sticker, degrease the surface to be covered.
    After positioning, press down hard and straight from above to incorporate the microbeads on the surface of the adhesive material into the adhesive and to achieve the original adhesive strength. Be sure to crimp the adhesive. Lateral rubbing may damage the wrap and printing.

    Although we do our best to make the colors in the product photos as close as possible to how they actually look, some products have very strong colors and the way they look changes depending on the surrounding light, making it very difficult or impossible to reproduce them on a monitor screen or other display device. For this reason, we have prepared free colour samples.
    The colour samples include all the colours of the WRAPGRADE series, as well as limited-time-only colours, and are made of the same material as the product to be delivered.

    If you cannot decide which color is best for you, or if you are unsure about the color, please ask for a color sample postcard in advance.
    We do not accept requests for returns or exchanges of colors from customers who have not ordered a color sample.

  • This product is made for a drone. Please do not use it for any other purpose. Misuse may cause unexpected accidents.
  • Keep out of reach of children. There is a risk of suffocation if accidentally swallowed.
  • If you feel it has negative effects on the performance after applying the sticker to the drone, please stop using and remove the sticker immediately.
  • This product is our original and not a licensed product. Applying the sticker to a drone is the responsibility of the purchaser. We have confirmed that there was no problem in general use. Please note that we are not responsible for any trouble that may occur.
  • The color of This product might change with use, it may fade. Discoloration, part peeling is not our responsibility.
  • The drone's body in the product photos, background decorations are not included in the product. We might change the design or layout without notice.
  • Company name and product name on this site are trademarks or registered trademarks of each company.

High-Quality Material

We use 3M automotive-grade wrap films. The 3M high-quality films are made for outdoor use. The thin and strong material withstands the harsh environment during use, and it does not affect the performance. We have confirmed that it does not affect the radio waves either.

ドローンの登録記号をステッカーで表示しませんか

100g以上のドローンは国土交通省への登録が義務化されるようになりました。当アイテムで手軽に正しく表示できます。無人航空機登録制度についてコラムに詳細情報をまとめました。ぜひご覧ください。