WRAPGRADE for DJI Avata 360 Accent Color

¥2,200           
多色展開
予約
Tax included. Shipping calculated at checkout.
SKU: DW-AV36AC-GL002

Wrapgrade helps you to

・Protect your drone from scratches
・Make your drone stand out in the sky
・Personalize just by wrapping

Accurate designed & cut wraps. No need to use special tools like hair dryers. It is easy to apply & remove. No sticky residue!

Pre-Order  Now

These are Pre-order items and will be started shipping from 31st July.

Your orders included them will be shipped from 31th July so please be aware of it.

The Accent Color partially covers the top, bottom, arms of your Avata 360.

In addition to simply dressing up your drone, the use of an Accent Color is expected to make it easier to see your drone's direction compared to a drone in the original grey color.

The Wrapgrade's quality remains the same even if it is only partially applied. Recommended as an introduction to drone wrapping for those who do not have the confidence to do a full wrap yet.

It protects your drone from all directions.

High-quality, automotive-quality materials are used.

Avata 360 comes in 10 colors (added new colors).

Note

It has been found that some batches of new subject products have been coated with an anti-fouling coating.
There may also be residues of stripping agents in plastic casting. 

These can significantly reduce the adhesive strength of the wrap. Be sure to degrease and clean the product thoroughly before starting the application process.

Spec

  • An instruction manual is attached (English, German, French, Simplified Chinese, Japanese)
  • Contains wraps for the body and a battery in 1 set.
    *Stickers for extra Battery, Remote Controller and Goggle are sold separately.
  • Size: about 13 cm × 19 cm / 5.12 in x 7.48 in 1 sheet, about 8 cm x 19 cm / 0.78 in x 7.48 in 1 sheet
  • Weight: Wraps=6g, Package=45g
  • Material: Polyvinyl chloride
  • Thickness: 0.12 mm to 0.17 mm / 0.004 in to 0.006 in
    ※differs by surface finish including adhesive
  • Adhesive: Acrylic (Please use an exclusive adhesive doesn't leave much glue behind.)
  • Optimal temperature:25 ℃ ( 77 ℉ )
  • Corresponding ambient temperature: -30 to 107 °C (-22 to 224.6 ℉), Continuous 70 °C (158 ℉)
  • Weather resistance: About 3 years (by the application methods and use environment, this time may become shorter)


商品写真の色味などは極力実際の見え方に近づけるよう努めていますが、商品にはカラーによって非常に強い色彩を持つもの、周りの光により見え方が変化するものがあり、モニター画面などの表示装置に再現することは非常に困難であるか不可能です。そのため無料のカラーサンプルを用意しました。


カラーサンプルには、WRAPGRADEシリーズ全色と期間限定カラー等の、お届けする商品と同じ素材が貼られています。


どの色がよいか決めかねている方、色について不安がある方は、ぜひ事前にカラーサンプルポストカードをお取り寄せください。


※カラーサンプルを取り寄せていないお客様の色についての返品・交換要望はお受け致しかねます。

    • This product is made for a drone. Please do not use it for any other purpose. Misuse may cause unexpected accidents.
    • Keep out of reach of children. There is a risk of suffocation if accidentally swallowed.
    • If you feel it has negative effects on the performance after applying the sticker to the drone, please stop using and remove the sticker immediately.
    • This product is our original and not a licensed product. Applying the sticker to a drone is the responsibility of the purchaser. We have confirmed that there was no problem in general use. Please note that we are not responsible for any trouble that may occur.
    • The color of This product might change with use, it may fade. Discoloration, part peeling is not our responsibility.
    • The drone's body in the product photos, background decorations are not included in the product. We might change the design or layout without notice.
    • Company name and product name on this site are trademarks or registered trademarks of each company.

    Cover the entire face of goggles

    for DJI Goggles N3

    今すぐ購入する

    High-Quality Material

    We use 3M automotive-grade wrap films. The 3M high-quality films are made for outdoor use. The thin and strong material withstands the harsh environment during use, and it does not affect the performance. We have confirmed that it does not affect the radio waves either.