WRAPGRADE for Spark Unit A

Name: WRAPGRADE for Spark Unit A
Brand: Wrapgrade
SKU: DWSK-M-UA-GL002
Price: 1500.0 JPY
Availability: InStock

¥1,500　　　　　　　　　　　

多色展開

カートIN割引

Tax included. Shipping calculated at checkout.

SKU: DWSK-M-UA-GL002

Quantity

Wrapgrade helps you to

・Protects against scratches and atmospheric dirt
・Improves visibility during flight, aiding in visual flight
・Can be personalized with your favorite colors

It is a DIY wrapping skin sticker, cut specifically for your device, to dress it up. You can dramatically change the look of your drone by simply applying it, without having to paint or modify the body.

Description
■Specs
■Notes

Unit A contains only the top stripe and the arm part. The top stripe protects the top surface which easily get scratched, and the top side part shows the original color of your spark.

Size: About 12.5 cm × 30 cm
Weight of wraps to apply: about 3 g
Material: Polyvinyl chloride
Thickness: 0.12 mm to 0.17 mm (differs by surface finish including adhesive)
Adhesive: Acrylic
Corresponding ambient temperature: -30 to 107 °C, Continuous 70 °C
Weather resistance: About three years (by the apply methods and use environment, this time may become shorter)

[IMPORTANT NOTICE] The colors in the pictures and videos may differ from actual colors. To avoid misselection, we recommend ordering our free color sample first. If you do not get a sample in advance, we do not accept returning or exchanging.

▲Important notes before pasting
It has been found that some batches of new subject products have been coated with an anti-fouling coating.
There may also be residues of stripping agents in plastic casting.

These can significantly reduce the adhesive strength of the wrap. Be sure to degrease and clean the product thoroughly before starting the application process.

⚠️

WARNING and SAFETY INFORMATION

AGE RESTRICTION: Recommended for ages 15 and over. Keep out of reach of infants and young children.
CHOKING HAZARD: Small parts. Risk of suffocation if swallowed.
USAGE & SAFETY: This product is a decorative skin sticker set specifically designed for drones. Do not use for any other purpose.
FLIGHT SAFETY: After applying the stickers, check the performance and movement of the drones. If you notice any negative impact on flight performance or stability, stop using the product immediately.
APPLICATION & REMOVAL: Ensure the surface is clean and degreased before application. Remove the stickers slowly to prevent adhesive residue.

General Information

This product is our original and not a licensed product. Applying the sticker to a drones is the responsibility of the purchaser. We have confirmed that there was no problem in general use. Please note that we are not responsible for any trouble that may occur.
The color of This product might change with use, it may fade. Discoloration, part peeling is not our responsibility.
The drones in the product photos, background decorations are not included in the product. We might change the design or layout without notice.
Company name and product name on this site are trademarks or registered trademarks of each company.

■Design

Unit A contains only the top stripe and the arm part. The top stripe protects the top surface which easily get scratched, and the top side part shows the original color of your spark. Improve visibility by wrapping the arm part and changing it from ordinary grey color. Parts for the central part of the LED cover and side of the camera are included. *There is a high possibility that the arm wraps get damaged by installing the propeller-guard and landing gear. Combining with Unit B makes your Spark full-wrapped. It is also good to coordinate with two colors.

Made with high-quality materials

Uses high-quality car wrap film material made by 3M. The thin yet strong material is unlikely to affect flight performance, and has been confirmed to have no effect on radio waves.