WRAPGRADE for Mavic Air Unit A

¥2,000           
多色展開
カートIN割引
Tax included. Shipping calculated at checkout.
SKU: DWMA-P-UA-GL002

Wrapgrade helps you to

・Protects from scratches and airborne dirt
・Improves visibility during flight, aiding visual line-of-sight operations
・Allows for personalization with your favorite colors

These are DIY wrapping and skin decals, custom-cut for dressing up your drone. You can dramatically change the look of your drone simply by applying them, without needing to paint or modify the aircraft.

Unit A covers the top cover, front landing gear, the rear trim and some other parts. It casually protects your Mavic Air. A spare replacement part for the top cover is included.

The matte dark silver wrap will cover the rear trim, it is close to the original color and shows DJI logo.

  • Size: About 12.5 cm × 30 cm
  • Weight of drone attached: about 3 g
  • Material: Polyvinyl chloride
  • Thickness: 0.12 mm to 0.17 mm (differs by surface finish including adhesive)
  • Adhesive: Acrylic
  • Corresponding ambient temperature: -30 to 107 °C, Continuous 70 °C
  • Weather resistance: About three years (by the application methods and use environment, this time may become shorter)

[IMPORTANT NOTICE] The colors in the pictures and videos may differ from actual colors. To avoid misselection, we recommend ordering our free color sample first. If you do not get a sample in advance, we do not accept returning or exchanging.

▲Important notes before pasting
It has been found that some batches of new subject products have been coated with an anti-fouling coating.
There may also be residues of stripping agents in plastic casting.

These can significantly reduce the adhesive strength of the wrap. Be sure to degrease and clean the product thoroughly before starting the application process.


⚠️

WARNING and SAFETY INFORMATION

  • AGE RESTRICTION: Recommended for ages 15 and over. Keep out of reach of infants and young children.
  • CHOKING HAZARD: Small parts. Risk of suffocation if swallowed.
  • USAGE & SAFETY: This product is a decorative skin sticker set specifically designed for drones. Do not use for any other purpose.
  • FLIGHT SAFETY: After applying the stickers, check the performance and movement of the drones. If you notice any negative impact on flight performance or stability, stop using the product immediately.
  • APPLICATION & REMOVAL: Ensure the surface is clean and degreased before application. Remove the stickers slowly to prevent adhesive residue.

General Information

  • This product is our original and not a licensed product. Applying the sticker to a drones is the responsibility of the purchaser. We have confirmed that there was no problem in general use. Please note that we are not responsible for any trouble that may occur.
  • The color of This product might change with use, it may fade. Discoloration, part peeling is not our responsibility.
  • The drones in the product photos, background decorations are not included in the product. We might change the design or layout without notice.
    Company name and product name on this site are trademarks or registered trademarks of each company.

■Design

Unit A covers the top cover, front landing gear, the rear trim and some other parts. It casually protects your Mavic Air. A spare replacement part for the top cover is included.

If you use Unit B together, it will be a full wrap. The matte dark silver wrap will cover the rear trim, it is close to the original color and shows DJI logo.

*This set does NOT include wraps for battery and remote controller.

Made with high-quality materials

Uses high-quality car wrapping film material made by 3M. The material is thin yet strong, minimizing impact on flight performance, and has been confirmed to have no effect on radio waves.

How-to video