WRAPGRADE for Custom Wrap Tajima Plastic CLIP-n-HOLD SF-CHLD

• Plastic sef spec.
• 1 set: for 2 plastic Clip-n-Hold.
• Compatible models: SF-CHLD/SF-CHLDS2M/SF-HLD-R/SF-BHLD
• Size: approx. 13.5 cm x 9 cm (1 piece)
• Material: Polyvinyl chloride
• Thickness: 0.12 mm - 0.17 mm (depending on surface finish) Including adhesive)
• Adhesive: Acrylic (special adhesive that is re-peelable and does not leave adhesive residue).
• Ambient temperature: -30 to 107°C (-30 to 107°F) instantaneously, 70°C (70°F) continuously.
• Approximate weather resistance: 3 years (may be shorter depending on installation method and environment of use).
• Japanese user manual included.

Although every effort has been made to ensure that the colours in the product photographs are as close as possible to the actual appearance of the product, some products have very strong colours or appear differently depending on the ambient light, making it very difficult or impossible to reproduce them on a monitor screen or other display device. For this reason, free colour samples are available.

The colour samples include all the colours of the WRAPGRADE series, as well as limited-time-only colours, and are made of the same material as the product to be delivered.

If you cannot decide which colour is best for you, or if you are unsure about the colour, please ask for a colour sample postcard in advance.

We do not accept requests for returns or exchanges of colours from customers who have not ordered a colour sample.

• The purchaser is required to apply the product to the product. Please check if you are able to handle this product before purchasing it.
• This product is a hobby item. Do not use for other purposes. Do not use for any other purpose as it may cause unexpected accidents.
• Parts for rubber-coated parts such as grips do not show their original adhesive strength. Please use for ornamental purposes only.
• Ages 14 and over Please take care that children do not accidentally swallow small parts. When storing the product, take care to keep it out of reach.
• If you feel any adverse effects on operation or performance after applying the adhesive, stop using it immediately and peel it off.
• Although the product is made of a material that is designed to be re-peelable and does not leave adhesive residue, the sticker or adhesive may remain on the sticking surface if used for a long period of time (more than three years) or depending on the environment of use.
• Printed products may peel off due to abrasion or blows to the printed area. Printed inks are water and weather resistant, but may dissolve in organic solvents and chemicals. Do not wipe with alcohol, thinner or other organic solvents.
• This product is our original hobby product and is not a licensed product of any manufacturer. Trademarks and product names included in the product names indicate compatible models and each company has the rights etc. to them.
• Some or all of the skin stickers may not be returned for repair or warranty due to replacement by the manufacturer or retailer.
• The purchaser is responsible for applying the sticker. We have confirmed that no problems will occur under normal conditions of use, but please note that we cannot be held responsible for any loss or damage caused by the use, inability to use or misuse of this product.
• Packaging photographs and product details may vary. Batteries, power tools and background decorations included in the product photo are not included in the product.
• The design and layout of the product is subject to change without notice due to improvements.