WRAPGRADE for Custom Wrap Tajima CLIP-n-HOLD SF-MHLD

¥1,100
Tax included. Shipping calculated at checkout.
SKU: SCW-MHLD-NE002

What's WRAPGRADE?

  • Personalize your CLIP-n=HOLD.
  • Improve the visibility and prevent loss/theft.
  • Prevent from scratches and dirt.

Exclusively cut for CLIP-n-HOLD. You don't need to paint it to change the color, simply wrap it.

COLOR YOUR
CLIP-n-HOLD

11 COLORS


A new fashion. Color and personalize your Tajima Clip-n-HOLD! You can color it simply by wrapping it.

HOW TO APPLY


  • Model number: SCW-MHLD

     1 set: 2 metal sef. holders for Tajima SF-MHLD (metal sef. holder for body belt, right)

     Size: approx. 13.5 cm x 9 cm 1 piece

  • Model number: SCW-MH2M

     1 set: 1 set for 2 sets of metal upper and lower safety belts, for use with Tajima Safety rear attachment holders metal upper and lower SF-MHLDS2M.

  • Size: approx. 13.5 cm x 9 cm (1 piece)
  • Material: Polyvinyl chloride
  • Thickness: 0.12 mm - 0.17 mm (depending on surface finish) Including adhesive)
  • Adhesive: Acrylic (special adhesive that is re-peelable and does not leave adhesive residue).
  • Ambient temperature: -30 to 107°C (-30 to 107°F) instantaneously, 70°C (70°F) continuously.
  • Approximate weather resistance: approx. 3 years (may be shorter depending on installation method and environment of use).

Although we try to ensure that the colours in the product photos are as close as possible to the actual appearance of the product, some products have very strong colours or appear differently depending on the ambient light, making it very difficult or impossible to reproduce them on a monitor screen or other display device. For this reason, we have prepared the free colour sample postcard.

The colour samples include all the colours of the WRAPGRADE series, as well as limited-time-only colours, and are made of the same material as the product to be delivered.

If you cannot decide which colour is best for you, or if you are unsure about the colour, please ask for a colour sample postcard in advance.

We do not accept requests for returns or exchanges of colours from customers who have not ordered a colour sample.

  • The purchaser is required to apply the product to the product. Please check if you are able to handle this product before purchasing it.
  • This product is a hobby item. Do not use for other purposes. Do not use for any other purpose as it may cause unexpected accidents.
  • Parts for rubber-coated parts such as grips do not show their original adhesive strength. Please use for ornamental purposes only.
  • Ages 14 and over Please take care that children do not accidentally swallow small parts. When storing the product, take care to keep it out of reach.
  • If you feel any adverse effects on operation or performance after applying the adhesive, stop using it immediately and peel it off.
  • Although the product is made of a material that is designed to be re-peelable and does not leave adhesive residue, the sticker or adhesive may remain on the sticking surface if used for a long period of time (more than three years) or depending on the environment of use.
  • Printed products may peel off due to abrasion or blows to the printed area. Printed inks are water and weather resistant, but may dissolve in organic solvents and chemicals. Do not wipe with alcohol, thinner or other organic solvents.
  • This product is our original hobby product and is not a licensed product of any manufacturer. Trademarks and product names included in the product names indicate compatible models and each company has the rights etc. to them.
  • Some or all of the skin stickers may not be returned for repair or warranty due to replacement by the manufacturer or retailer.
  • The purchaser is responsible for applying the sticker. We have confirmed that no problems will occur under normal conditions of use, but please note that we cannot be held responsible for any loss or damage caused by the use, inability to use or misuse of this product.
  • Packaging photographs and product details may vary. Batteries, power tools and background decorations included in the product photo are not included in the product.
  • The design and layout of the product is subject to change without notice due to improvements.

Craftsmen pay attention to detail

Color change your metal CLIP-n-HOLD by simply applying the custom wrap on. Color-coordinate with your favorite tools and workwear to boost motivation.

Make a difference with colors that have never been seen before

Available in various unique colors. How about a full customization with battery custom wraps, case accent colors and custom wraps for impact drivers?

Bright colors, such as neon, are highly visible and prevent loss or accidents. Good to increase safety and efficiency.

QUALITY DESIGN AND MATERIAL

World-renowned Wrapgrade's reliable quality. High-precision manufacturing in Japan. We use the 3M's automotive-grade wrapping films.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
匿名

よかったです!

インパクト用カスタムラップで手軽にインパクトドライバーをカスタム

マキタのインパクトドライバーをお手軽にカスタムしませんか?インパクト用カスタムラップがあれば、貼るだけで簡単にカスタム可能! 人と違うインパクトにしたいけど塗装や工作は苦手。水圧転写は高いし・・そんなあなたにオススメなのがインパクト用カスタムラップでのオリジナルカスタム! 周りの人と一味違うインパクトドライバーやケースを使いたいあなたにおすすめです◎バッテリーカスタムラップや名入れステッカーとカラーコーディネートして、推し色でブチ上げろ!